Universal Car Lift Kit For Cars With 4 Coil Springs Spacers Fit Most RWD Cars

    25 reviews
    4.80 out of 5

    $99.00 $69.00

    UCL 3 inch to 5 inch universal coil spring lift cup kit for pretty much all cars with 4 coil springs in them. This car lift kit installs under your factory coil springs. Clear up to 24 inch rims and tires with these cups (measure to be sure).

    Universal car lift kits fit vehicles like Carpice, Cutlass, Monte Carlo, Grand Marquis, Impala, Regal, Malibu, Belair, Crown Vic, etc. Anything with 4 coil springs in it. Package comes with 4 booster cups, installation DVD and install instructions. Most people could do the installation with hand tools and a jack. Durable black powder coat finish and lifetime warranty are included.

    UCL universal lift spring cups are the best built on the market. Made from huge, over-sized heavy duty tubing combined with CNC precision cut parts. All UCL lift cups have a black powder coated finish and also include a free install DVD. These are the best cups money can buy!

    A basic overview of how to install the spring spacers:

    1. Raise your vehicle in the air.
    2. Support the front lower control arm with a jack.
    3. Disconnect the lower ball joint.
    4. Disconnect the shock.
    5. Carefully lower the jack supporting the lower control arm.
    6. Install spring compressor on spring.
    7. Install spring with lift cup in to car. Trim cup if necessary.
    8. Raise jack supporting lower control arm.
    9. Reconnect lower ball joint.
    10. Reinstall shock absorbers.
    11. Support rear differential with jack.
    12. Disconnect rear shocks.
    13. Lower jack supporting rear differential.
    14. Install lift cups between springs and spring perch.
    15. Raise jack supporting rear differential.
    16. Reconnect shock absorbers.

    A  more detailed instruction manual, including photos, comes with kit. Also included is an installation DVD to show you step by step how to install a complete car lift kit. We recommend running these cups with our extended front control arms, rear trailing arms and extended lift shocks. The front arms will keep your alignment straight. The rear trailing arms will keep your pinion angle correct and also center your wheel in the wheel well. Extended length shock absorbers will allow additional travel and are also recommended when lifting. If you have any questions, feel free to contact us via phone or email.

    Some notes about these cups

    We send the cups to you set up for around 5 inches of lift. If you want less lift, you can cut a little off the bottom of the cup. Simply take a saw or grinder and trim about 1/4″ at a time off the bottom of the cup to adjust the lift to any height needed. You can get anywhere from 3 to 5 inches of lift using this method. Generally, if you are installing 24’s or bigger you will need a minimum of 5 inches of lift to clear. The only reason you would need 3 inches is if you plan on cutting your car’s fenders or plan on running 20’s or 22’s and just need a little extra boost.


    Please specify year, make, and model when ordering.