98-02 Ford Crown Victoria Gorilla Lift Kit Marquis Vic

8 reviews
4.88 out of 5

From: $1,999.00

-

Gorilla Lift Kit with lift springs for 1998-2002 Ford Crown Victoria, Mercury Grand Marquis and Lincoln Town Car. This kit includes lift springs to lift your car 4 to 5 inches. Clear 22 to 28 inch rim and tire combos with this kit (measure to be sure).

 

Crown Vic, Marquis and Town Car Gorilla lift kit

The Gorilla Kit comes with coil lift springs, front control arms, rear trailing arms, adjustable track/panhard bar, extended front lift shocks, rear air shocks, bushings, ball joints, installation manual and full install DVD. This kit includes adjustable front control arms to eliminate negative camber (where the wheel tilts inwards towards the top) that is caused when lifting a car. Also included are the rear adjustable trailing arms to keep the wheel centered in the wheel well and drive shaft angle correct. The adjustable arms will keep your tires from wearing excessively on the inside and will keep your alignment on straight.

 

Heavy duty parts much stronger than stock

UCL parts are built out of rugged over-sized steel of the highest quality and craftsmanship. Coil springs are precision wound, shot peened and preset. Front control arms are built from massive 1/2″ thick steel plate. Rear trailing arms are 1-3/4″ diameter and feature adjustable threaded ends with jam nuts included for easy adjustment.

 

Extended shocks for a smooth ride

Extended lift shock absorbers are included. They have a better dampening rate than stock along with increased travel. This will prevent your shock absorber from bottoming out when lifted. Lifted shock absorbers reduce the harsh effects of traveling over rough pavement which leads to improved ride quality and car handling. Lift shocks are of a gas charged, twin tube design. They use a low pressure charge of nitrogen gas in the reservoir tube to reduce foaming and aeration, commonly found in worn older vehicle shocks.

 

Lifetime warranty on the kit

Parts have a durable black powder coat finish and lifetime warranty.

 

Have us install the bushings 

Most shops and customers agree that the installation time and stress levels are greatly reduced when you have us INSTALL the Bushings. Simply select the option that says “Installed In Kit”.

 

ABOUT OUR OPTIONS:

  • “Included In Kit” = The Kit will come with the Bushings and Ball joints (no cross shafts). You will need to install the bushings and ball joints.
  • “Installed In Kit” = The kit will come with the cross shafts and all the bushings and ball joints INSTALLED!! Customers agree this is the best option.

 

Fits: 1998-2002 Ford Crown Victoria, Mercury Grand Marquis and Lincoln Town Car.