3″ to 10″ complete suspension kit for 98-02 Ford Crown Vic, Mercury Grand Marquis and Lincoln Town Car. This kit installs under your factory coil springs to lift your Car 3 to 10 inches! Clear 22 inch up to 28 inch rims and tires with this kit (measure to be sure).
Full suspension lift package for your Crown Victoria platform
Comes with spring lift spacer cups, front adjustable control arms, adjustable rear arms, extended lift shocks, adjustable extended panhard bar / track bar, installation manual and full install DVD. This kit includes adjustable control arms for the front of the car to eliminate the negative camber (where the wheel tilts in at the top) that is caused when lifting a car. Also included are the rear adjustable trailing arms to keep the wheel centered in the wheel well and drive shaft pinion angle correct. Adjustable arms will keep your tires from wearing excessively on the inside and will keep your alignment on straight.
Special notes about this application
NOTE: THIS KIT COMES WITH 2 UPPER FRONT A-ARMS, 2 UPPER REAR ARMS, 2 LOWER REAR ARMS, AND 1 REAR PANHARD BAR. IF YOUR CAR IS/WAS A POLICE EDITION OR HAS A TOWING PACKAGE/HEAVY DUTY FACTORY SUSPENSION YOU MAY NEED AN ADDITIONAL REAR PANHARD BAR, CHECK TO BE SURE.
UCL has lifts to fit any size rim and tire combo
This kit is offered in a 3″ all the way up to a 10″ kit. If you are looking for the “tucked” look, we recommend a 3″ to 5″ kit with some minor fender trimming. For a clean look with minimal trimming, we recommend a 7″ or 10″ kit. If you are running 26’s or bigger and want the “over the rim” look, we recommend checking out our 13″ complete high riser lift kit for this application. If you are unsure what size lift you need, feel free to contact us and we would be happy to help.
The highest quality parts for your car lift kit
UCL parts are built out of rugged over-sized steel of the highest quality and craftsmanship. Parts have a durable black powder coat finish and lifetime warranty. 10″ Kit also includes universal body lift kit. Remember to add the Bushings! Most shops and customers agree that the installation time and stress levels are greatly reduced when you include the Bushings. Simply select the option that says “Included In Kit”.
ABOUT OUR OPTIONS:
- “Not Included” = You will need to get your own bushings from a part store.
- “Included In Kit” = The Kit will come with the bushings. You will need to install the bushings.
- “Installed In Kit” = The kit will come with the all the bushings INSTALLED!! Customers agree this is the best option.
Why powder coated parts are better than spray paint
UCL is the only car lift company to powder coat every suspension part. Powder coat is a durable baked on coating that makes your suspension parts last forever. Without powder coating, the parts will rust and fail quickly. The auto manufacturers powder coat stock suspension parts before they leave the factory. Demand that your parts be powder coated for years of durability. The video shown below shows the difference in a simulated test.