78-88 GM G BODY 3″ TO 10″ CAR LIFT KIT FOR CUTLASS, REGAL, MONTE & MORE

    21 reviews
    4.62 out of 5

    From: $769.00

    Clear

    3″ to 10″ complete suspension kit for 1978-1988 Chevy Monte Carlo, Oldsmobile Cutlass, Malibu, El Camino, Grand Prix, Century, Bonneville, Grand Am, Lemans, Caballero, and Buick Regal. This kit installs under your factory coil springs to lift your Car 3 to 10 inches! Clear 22 inch up to 28 inch rims and tires with this kit (measure to be sure).

     

    A suspension lift system with what you need

    Comes with lift cups, front and rear control arms, extended lift shocks, installation manual and full install DVD. This kit includes adjustable extended control arms for the front of the car to eliminate the negative camber (where the wheel tilts inwards towards the top) that is caused when lifting a car. Also included are the rear adjustable trailing arms to keep the wheel centered in the wheel well and drive shaft angle correct. The adjustable arms will keep your tires from wearing excessively on the inside and will keep your alignment on straight.

     

    Quality parts that last a lifetime

    UCL parts are expertly made out of rugged over-sized steel of the highest quality and craftsmanship. Parts have a durable black powder coat finish and lifetime warranty. 10″ Kit also includes cast lift spindles. Remember to add the Bushings and Ball joints! Most shops and customers agree that the installation time and stress levels are greatly reduced when you have us INSTALL the Bushings and Ball joints. Simply select the option that says “Installed In Kit”.

     

    The best technical support in the business

    Need help with this product? Have a question about your application or need help with installation? We would love to help! Contact us by clicking here.

     

    ABOUT OUR OPTIONS:

    1. “Not Included” = You will need to get your own bushings and ball joints from a part store.
    2. “Included In Kit” = The kit will come with the bushings and ball joints (no cross shafts). You will need to install the bushings and ball joints.
    3. “Installed In Kit” = The kit will come with the cross shafts and all the bushings and balljoints INSTALLED!! Customers agree this is the best option.