03-05 FORD PANTHER 3″ TO 10″ CAR LIFT KIT FOR CROWN VIC, MARQUIS, TOWN CAR

17 reviews
4.53 out of 5

From: $869.00

Clear

3″ to 10″ complete suspension kit for 2003-2005 Crown Victoria, Grand Marquis, and Town car. This kit installs under your factory coil springs to lift your Car 3 to 10 inches! Clear 22 inch up to 28 inch rims and tires with this kit (measure to be sure).

 

Complete suspension system designed for your Crown Victoria, Grand Marquis, Town Car and Marauder

Comes with custom strut lift spacer brackets with lift cups, front and rear control arms, panhard bar, extended rear shocks, installation manual and full install DVD. This kit includes control arms for the front of the car to eliminate the negative camber (where the wheel tilts inwards towards the top) that is caused when lifting a car. Also included are the rear adjustable trailing arms to keep the wheel centered in the wheel well and drive shaft angle correct. The panhard bar keeps your axle centered side to side. Adjustable arms will keep your tires from wearing excessively on the inside and will keep your alignment on straight.

 

High quality components with a powder coated finish standard

UCL parts are built out of rugged over-sized steel of the highest quality and craftsmanship. Parts have a durable black powder coat finish and lifetime warranty. 8″ Kit also includes universal body lift kit. 10″ kit adds a body lift and threaded adjustable coil-over front struts, which will allow you to get a few extra inches out of the front suspension.  Remember to add the bushings and ball joints! Most shops and customers agree that the installation time and stress levels are greatly reduced when you have us INSTALL the Bushings. Simply select the option that says “Installed In Kit”.

 

Special notes about this application

Note: this kit comes standard with 1 panhard bar- if you have a police edition, taxi, towing package, Grand Marquis or Town Car you may need an extra bar, be sure to select the correct option below.

 

ABOUT OUR OPTIONS:

  • “Not Included” = You will need to get your own bushings and ball joints from a part store.
  • “Included In Kit” = The kit will come with the bushings and ball joints. You will need to install the bushings and ball joints with a press.
  • “Installed In Kit” = The kit will come with the bushings and ball joints INSTALLED!! Customers agree this is the best option.
  • “Panhard / Track Bars” = Either 1 panhard bar or 2 panhard bars, depending on how many your car has